Thermodynamic parameters of amitriptyline hydrochloride–additives at cloud point: effects of the ethanol–water mixed media

Abstract

Addition of organic solvents is known to change the properties of amphiphiles through modification of bulk phase. Amitriptyline hydrochloride (AMT) is a tricyclic amphiphilic drug which is usually used as an antidepressant. In drug delivery, the cloud point (CP) of the drug is an important parameter. This article discusses the effects of ethanol–water (EtOH–WR) compositions on the energetic parameters, such as changes in Gibbs energy of clouding (Δ_sG⁰), enthalpy of clouding (Δ_sH⁰), and entropy of clouding (TΔ_sS⁰) of AMT-additive systems. Monovalent alkali halide salts, cationic conventional surfactants, and gemini surfactants were used as additives in the EtOH–WR mixed media whose compositions were varied between 0 and 15% (w/w). The Δ_sG⁰ values are positive for all the additives and the values decrease with the rise in mole fractions of the additives. The Δ_sH⁰ and TΔ_sS⁰ were noted to be positive except for KF in 15% EtOH–WR mixed media.     

采用轮廓特征匹配的红外-可见光视频自动配准

为了精确地配准近平面场景下的红外-可见光视频序列,本文提出了一种基于轮廓特征匹配的自动配准方法,通过迭代匹配目标轮廓特征来解决异源图像中配准特征的提取和匹配难题。首先,采用运动目标检测技术获取目标轮廓,并由曲率尺度空间(CSS)角点检测算法提取轮廓特征点。此后,建立全局形状上下文描述子和局部边缘方向直方图描述子描述特征,从而实现可靠的特征匹配。来自不同时刻的匹配点对被保存在一个基于高斯距离准则的特征匹配库中。最后,为了克服近平面场景中目标深度变化的影响,本文结合前景样本随机抽样策略计算配准矩阵的损失函数,完成对全局配准矩阵的更新。在LITIV数据库上对方法进行实验验证,结果表明本文方法的配准精度优于当前先进的对比方法,在9个测试视频上的平均重叠率误差仅为0.194,与对比方法相比下降了18.5%。基本满足了近平面场景下红外-可见光视频序列配准的精度要求,且具有较高的鲁棒性。     

港里矿软破围岩采矿的分析与研究

港里矿围岩软弱破碎，随开采深度延伸，地压显现越来越剧烈，严重影响港里矿正常回采。为研究港里矿软破围岩采矿，分析了影响采矿正常进行的因素和机理，调整采矿的顺序，使港里矿软破围岩采矿的困难得到根本扭转，保证了采矿生产的正常进行，选择围岩稳固及充分卸压部位布置斜坡道和联巷、优先回采围岩破碎的高应力区是地压管理的关键问题。     

闭口闪点测定方法的对比分析

对我国常用的闭口闪点测定方法宾斯基-马丁闭口杯法、阿贝尔闭口杯法和泰格闭口杯法的测定原理进行对比分析，并采用这3种方法分别对2种有证标准样品、4种有机试剂样品和7种喷气燃料样品的闭口闪点进行测定。结果表明：这3种方法在适用范围、仪器结构、升温速率和点火操作要求等方面都有一定差异，导致采用这3种方法测定同一样品的闭口闪点结果略有差异，闪点测定结果之间的最大差值与样品闪点的高低呈正相关；与阿贝尔闭口杯法相比，宾斯基-马丁闭口杯法测得的闪点结果较高，对于3号喷气燃料，二者之差为0～1.0 ℃，阿贝尔闭口杯法更适合3号喷气燃料闭口闪点的测定；对于纯有机试剂样品，阿贝尔闭口杯法和宾斯基-马丁闭口杯法测得的闪点结果呈现较好的线性关系。     

热处理工艺对30MnCrNiMo高强钢组织与性能的影响

借助全自动淬火膨胀仪测定钢的Ac₁、Ac₃相变点,通过对试验钢进行淬火+亚温淬火+回火热处理和淬火+回火热处理,研究了两种热处理工艺下30MnCrNiMo高强钢的组织与性能。结果表明:30MnCrNiMo高强钢的Ac₁、Ac₃相变点分别为653、807 ℃。采用淬火+亚温淬火+回火的热处理工艺所获得的马氏体和铁素体复相组织比直接淬火+回火得到的全马氏体组织更为细小、均匀,试验钢的屈服强度为1499 MPa,伸长率为14.0%,室温、-40 ℃冲击吸收能量分别为35.5和29.5 J,钢的塑性和冲击性能显著提升,有效改善了30MnCrNiMo高强钢的强韧性能。     

含铜废水预处理设施脱氮升级改造工程

为了减轻太湖保护区范围内企业处理废水的负担,苏州白荡污水处理厂利用其含铜废水预处理设施的富余处理能力处理某公司产生的含氮废水。针对含氮废水高NO3^--N和低碳氮比等特点,在充分利用原处理设施的基础上,采用"A/O+固定床生物膜工艺+高效脱氮填料+乙酸钠碳源+内回流"组合工艺对含铜废水预处理设施进行脱氮升级改造。改造后实际运行结果表明,设施运行稳定,出水水质达到出水水质达到设计出水要求,TN和NH4^+-N的去除率分别达到85.4%和82.3%,Cu的去除率提高了17.6%。     

Material-point erosion simulation of dynamic fragmentation of metals

We present a validation assessment of the eigenerosion scheme applied in conjunction with the Optimal Transportation Meshfree (OTM) method. The assessment is based on the detonation-driven 304L steel spherical-cap fragmentation experiments of Campbell et al. (2007). Metrics used for purposes of validation include the velocity history of a witness point of the shell and the histogram of recovered fragment sizes. The results of the simulations are found to be in overall good agreement with the experimental measurements, especially when allowances are made for uncertainties in the characterization of the drive and material properties. The ability of the approach to predictively simulate exceedingly complex patterns of fracture and fragmentation under severe conditions of loading and material behavior is remarkable, especially in consideration of the simplicity of the fracture model and its implementation.     

基于ARM7的高精度频率计的设计

文章通过对相位重合检测技术的分析，提出了基于此理论并用ARM7作为主控芯片的高精度频率计的设计方法。该设计方法通过捕捉相位之间的重合点，能够有效消除±1个字的计数误差。在此基础上由于ARM7具有32位的处理器内核以及流水线技术，使得频率计的测量速度和精度比传统的使用16位单片机设计的频率计要高很多。本频率计最大测量频率为10MHz。同时本设计采用安捷伦公司生产的恒温晶振10811A作为标准频率，能够有效保证测量精度能够达到10-10量级。为了降低成本，在设计中选用采用ARM7芯片内部的计数器以及用简单的逻辑电路进行设计。由于其测量精度要超过多周期同步测量法，而成本又比模拟内插法和游标法低很多，因此此频率计拥有很广泛的市场前景。     

The use of bio-diesel based additive as rheology improver and pour point depressant of Nigerian waxy crude

The chemical method has proved to be the most effective mitigating method of wax deposition in petroleum system as it deals with the root cause of wax formation. Most of the commercial chemicals in the industry are very expensive and toxic. This paper aims the use of biodiesel based additives for improving the rheological behavior and pour points of waxy crude from Nigeria field. The biodiesels derived additives gave better performance than the commercial chemical and the seed oils as greatly improvement in rheology and pour point values of the waxy crude were observed